NCS-TT106H Temperature Transmitter Calibration Specifications

Temperature transmitter is used to continuously measure resistance and millivolt voltage signals and convert them into temperature values. NCS-TT106H HART protocol temperature transmitter converts the temperature value into a 4~20mA analog current signal output that is superimposed on the HART digit

How to Choose a Pressure Transmitter at an Intrinsically Safe Explosion-proof Site

In the chemical production process, a considerable number of applications require instruments with explosion-proof functions to meet on-site production safety requirements. Microcyber's pressure transmitter has obtained intrinsic safety and explosion-proof certification and can be used in explos

Basic knowledge of antennas (1)

As an important component for the radiation and reception of wireless signals, antennas play a key role in wireless communications. How exactly does the antenna convert the signal from wired to wireless? What are the key parameters of an antenna, and how to evaluate the performance of an antenna? Th

Special Applications for Dual-channel Temperature Transmitters

At various types of industrial production sites, temperature measurement points are most widely distributed. Important and key measurement points will use two temperature transmitters each connected to a single sensor or one temperature transmitter connected to two sensors, in order to achieve the p

MC0312 Modbus to HART-IP embedded core module (Over APL)

MC0312 Ethernet-APL embedded core module is a miniaturized module developed by Microcyberthat complies with 10BASE-T1L (IEEE 802.3cg) standard. It supports bus power supply, communication rate of 10Mbps, and maximum communication distance of 1000 meters.The MC0312 Ethernet-APL embedded c