microcyber logo

    • Product List

      Product Form

      Product Form

      Product Form

      Product Form

      Product Form

  1. Home
  2. /
  3. Product
  4. /
  5. Industrial Converters
  6. /
  7. NCS-FI105P Current Output Converter
NCS-FI105P
NCS-FI105P Dimensions
NCS-FI105P
NCS-FI105P Dimensions

NCS-FI105P Current Output Converter

NCS-FI105P

Product Overview

The NCS-FI105P is an intelligent current output converter based on the PROFIBUS PA protocol. It can convert standard PROFIBUS PA digital signals into four channels of 4-20mA analog current signals, serving as a converter between bus systems and control valves or other actuators. The device supports field calibration with magnetic rods, full isolation protection, and a rich set of function blocks, adapting to the high-precision control and stable output requirements of industrial environments.

No certification
Get a Quote
Application Cases
Input Signal PROFIBUS PA
Protocol Version Profile 3.02
Bus Supply Voltage (9~32)VDC, Quiescent Current ≤14mA
Output Signal 4~20mA
Current Output Mode NPN Collector Output
Number of Channels 4
Current Accuracy & Temp Drift Current Accuracy: 0.05%; Current Temp Drift: ±50ppm/℃
Max Load 1350Ω
Load Power Supply (5~32)VDC
Insulation Strength Between Terminals and Housing: 500VAC
Startup Time ≤5s
EMC IEC 61326 (GB/T 18268)
LCD Display 6-Digit Numeric and 5-Digit Alphanumeric LCD Module (Optional)
Local Operation Magnetic Wand Operation Supported
Operating Temperature No Display: (-40~85)℃
With Display: (-30~70)℃
Humidity Range (5~95)%RH
Storage Temperature (-50~85)℃
Protection Level IP65
Housing Material Low-Copper Aluminum Alloy
Electrical Connection 1/2-14 NPT Female Thread
Dimensions (90 × 96.5 × 139)mm
Mounting Bracket Mounting
Weight 1.1kg
  • Rapidly meets field application needs: Helps system integrators quickly achieve seamless conversion of PROFIBUS PA dynamic variables into 4–20 mA analog current signals to meet on-site application requirements.
  • Easy installation: The NCS-FI105P supports bracket mounting for simple and convenient installation.
  • Compatible with mainstream control systems: The NCS-FI105P has been tested and validated with major control systems from Siemens, Emerson, Schneider Electric, ABB, Honeywell, Rockwell Automation, and others.
  • Simple configuration: Supports GSD files, allowing users to clearly understand device parameters and perform convenient configuration through dedicated configuration software.
  • Easy to use: The NCS-FI105P includes an integrated current output unit that converts dynamic variables on the PROFIBUS PA network into standard 4–20 mA current signals.
  • Wide applications: Ideal for system integrators building PROFIBUS PA systems, as well as equipment manufacturers who need to convert PROFIBUS PA dynamic variables into 4–20 mA analog outputs.
  • PROFIBUS PA pre-certified: Pre-certified for protocol conformance by PROFIBUS Nutzerorganisation e.V. (PNO), helping accelerate formal PROFIBUS PA certification and reduce development time.
No files updated yet

    Certificates_approvals

No files updated yet
No files updated yet

Inquiry information