microcyber logo

    • Product List

      Product Form

      Product Form

      Product Form

      Product Form

      Product Form

  1. Home
  2. /
  3. Product
  4. /
  5. Industrial Communication
  6. /
  7. Gateways
  8. /
  9. G0313 Modbus to FF...
G0313
G0313
G0313
G0313 Dimension Drawing
G0313
G0313
G0313
G0313 Dimension Drawing

G0313 Modbus to FF Gateway

G0313

Product Overview

The G0313 is a Microcyber G Series DIN-rail protocol conversion gateway that enables efficient protocol conversion from Modbus RTU to FOUNDATION Fieldbus (FF). It helps users seamlessly integrate existing Modbus devices into an FF bus network. Featuring easy installation, strong compatibility, and simple configuration, it greatly improves fieldbus system integration efficiency and quickly meets system upgrade requirements.

No certification
Get a Quote
Application Cases
Output Signal FOUNDATION Fieldbus H1
Protocol Version ITK 6
Bus Supply Voltage (9~32)VDC, quiescent current ≤14mA
Gateway Supply Voltage (24±20%)VDC
Gateway Supply Current ≤60mA
Input Signal Modbus RTU
Modbus RTU Slave Address Range 1, 2, 3, 4
Modbus RTU Supported Baud Rates (2400, 4800, 9600, 14400, 19200)bps
Modbus RTU Supported Commands 1, 2, 3, 4, 5, 6, 16
Isolation Voltage 500VAC
Startup Time ≤5s
Update Time 0.2s
EMC IEC 61326 (GB/T 18268)
Display LED indicator
Operating Temperature (-20~70)℃
Humidity Range (5~95)%RH
Storage Temperature (-20~70)℃
Protection Level IP20
Housing Material ABS
Electrical Interface Pluggable terminal block
Dimensions (114.5 × 99 × 22.5)mm
Mounting DIN rail
Weight Approx. 0.15kg
  • Quickly meet field application needs: Help system integrators quickly achieve seamless conversion from Modbus to FOUNDATION Fieldbus (FF) to meet on-site application requirements.
  • Easy to install: Microcyber G-series gateways support DIN rail mounting for simple and convenient installation.
  • Comply with mainstream control systems: Microcyber G-series gateways have been tested and verified with major control systems from Siemens, Emerson, Schneider Electric, ABB, Honeywell, Rockwell Automation, and others.
  • Simple configuration: Supports DD files, allowing users to clearly understand device parameters and perform convenient configuration through dedicated configuration software.
  • Simple application: The G0313 includes a built-in Modbus master for communicating with Modbus RTU instruments through an RS485 interface. The gateway reads variables from connected instruments and automatically maps them to dynamic variables on the FOUNDATION Fieldbus (FF) network.
  • Wide range of applications: Ideal for system integrators building FOUNDATION Fieldbus systems, as well as manufacturers of measurement instruments, detectors, and analyzers that need to connect Modbus RTU devices to FOUNDATION Fieldbus networks.
  • FF pre-certified: Pre-certified by FieldComm Group (FCG) for network compliance, helping accelerate formal certification and reduce development time.
No files updated yet
No files updated yet
No files updated yet
No files updated yet

Inquiry information