microcyber logo

    • Product List

      Product Form

      Product Form

      Product Form

      Product Form

      Product Form

  1. Home
  2. /
  3. Product
  4. /
  5. Industrial Converters
  6. /
  7. NCS-FI105F Current Output Converter
NCS-FI105F FF to Current Converter
NCS-FI105F
NCS-FI105F
NCS-FI105F
NCS-FI105F Dimension Drawing
NCS-FI105F FF to Current Converter
NCS-FI105F
NCS-FI105F
NCS-FI105F
NCS-FI105F Dimension Drawing

NCS-FI105F Current Output Converter

NCS-FI105F

Product Overview

The NCS-FI105F is an intelligent current output converter based on the FOUNDATION Fieldbus protocol. It can convert standard FOUNDATION Fieldbus digital signals into four channels of 4-20mA analog current signals, serving as a converter between bus systems and control valves or other actuators. The device supports field calibration with magnetic rods, full isolation protection, and a rich set of function blocks, adapting to the high-precision control and stable output requirements of industrial environments.

No certification
Get a Quote
Application Cases
Input Signal FOUNDATION Fieldbus H1
Protocol Version ITK 6
Bus Supply Voltage (9~32)VDC, Quiescent Current ≤14mA
Output Signal 4~20mA
Current Output Mode NPN Collector Output
Number of Channels 4
Current Accuracy & Temp Drift Current Accuracy: 0.05%; Current Temp Drift: ±50ppm/℃
Max Load 1350Ω
Load Power Supply 5-32VDC
Insulation Strength Between Terminals and Housing: 500VAC
Startup Time ≤5s
EMC IEC 61326 (GB/T 18268)
LCD Display 6-Digit Numeric and 5-Digit Alphanumeric LCD Module (Optional)
Local Operation Magnetic Wand Operation Supported
Operating Temperature No Display: (-40~85)℃
With Display: (-30~70)℃
Humidity Range (5~95)%RH
Storage Temperature (-50~85)℃
Protection Level IP65
Housing Material Low-Copper Aluminum Alloy
Electrical Connection 1/2-14 NPT Female Thread
Dimensions (90 × 96.5 × 139)mm
Mounting Bracket Mounting
Weight 1.1kg
  • Rapidly meets field application needs: Helps system integrators quickly achieve seamless conversion of FOUNDATION Fieldbus dynamic variables into 4–20 mA analog current signals to meet on-site application requirements.
  • Easy installation: The NCS-FI105F supports bracket mounting for simple and convenient installation.
  • Compatible with mainstream control systems: The NCS-FI105F has been tested and validated with major control systems from Siemens, Emerson, Schneider Electric, ABB, Honeywell, Rockwell Automation, and others.
  • Simple configuration: Supports DD files, allowing users to clearly understand device parameters and perform convenient configuration through dedicated configuration software.
  • Easy to use: The NCS-FI105F includes an integrated current output unit that converts dynamic variables on the FOUNDATION Fieldbus network into standard 4–20 mA current signals.
  • Wide applications: Ideal for system integrators building FOUNDATION Fieldbus systems, as well as equipment manufacturers who need to convert FOUNDATION Fieldbus dynamic variables into 4–20 mA analog outputs.
  • FOUNDATION Fieldbus pre-certified: Pre-certified for protocol conformance by FieldComm Group (FCG), helping accelerate formal FOUNDATION Fieldbus certification and reduce development time.
No files updated yet
No files updated yet
No files updated yet

Inquiry information